Home › In-wall relays and modules › Shelly › Plus 1

Shelly Plus 1

Lapsed E2024173739 · Level 3 · expiry 18/07/2026 · checked 12 Oct 2026

An in-wall relay module using Wi-Fi + Bluetooth, with local control via Shelly HA integration, HTTP / MQTT, ESPHome (after flashing). Neutral wire: required (AC use). Max load: 16 A.

Installation must be done by a licensed electrician.

Specifications

TypeIn-wall relays and modules
ProtocolWi-Fi + Bluetooth
Local controlShelly HA integration, HTTP / MQTT, ESPHome (after flashing)
MatterNot listed
Neutral wireRequired (AC use)
Max load16 A
Wall plate sizeNot applicable

Registration in Australia

A registration exists for this model but it has lapsed. Suppliers often re-register under a new number, so before buying ask the seller for the current registration number and check it on the public register.

Records on the register for this model:

Equipment no.StatusExpiryLevelRegistered supplierModels on record
E2024173739Lapsed18/07/2026Level 3ALLOYS COMPUTER UNIT TRUSTShelly Plus 1

If you buy from someone other than the registered supplier, ask the seller where the stock came from.

Similar relays

Shelly Plus 1PMWi-Fi + BluetoothRegisteredShelly 1PM Gen3Wi-Fi + BluetoothRegisteredShelly 1PM Gen4Wi-Fi + Bluetooth + Zigbee + MatterRegisteredShelly 1PM Mini Gen4Wi-Fi + Bluetooth + Zigbee + MatterRegisteredShelly Pro 4PMWi-Fi + Bluetooth + LANRegisteredSONOFF ZBMINI Extreme no-neutral (ZBMINIL2)Zigbee 3.0Registered

All Shelly devices · All in-wall relays and modules

References

  1. EESS Registration Database, equipment E2024173739, status Expired, checked 12 Oct 2026. EESS public search (Advanced Search › Equipment Registrations › Equipment Number).
  2. ESPHome devices: Shelly Plus 1
  3. Shelly Knowledge Base: Plus 1
  4. Home Assistant: Shelly integration