Home › In-wall relays and modules › Shelly › 1PM Gen3

Shelly 1PM Gen3

Registered E2025019681 · Level 1 · expiry 25/11/2026 · checked 12 Oct 2026

An in-wall relay module using Wi-Fi + Bluetooth, with local control via Shelly HA integration, Matter, HTTP / MQTT. Neutral wire: required (AC use). Max load: 16 A resistive at 240 VAC.

Installation must be done by a licensed electrician.

Specifications

TypeIn-wall relays and modules
ProtocolWi-Fi + Bluetooth
Local controlShelly HA integration, Matter, HTTP / MQTT
MatterYes (firmware 1.6.0+)
Neutral wireRequired (AC use)
Max load16 A resistive at 240 VAC
Wall plate sizeNot applicable

Registration in Australia

This model has a current registration in the EESS database. Check that the model number on the box matches one listed below.

Records on the register for this model:

Equipment no.StatusExpiryLevelRegistered supplierModels on record
E2025019681Registered25/11/2026Level 1ALLOYS COMPUTER UNIT TRUSTShelly 1PM Gen3, 1PM Gen3
E2024302623Lapsed05/12/2025Level 1ALLOYS COMPUTER UNIT TRUSTShelly 1PM Gen3

If you buy from someone other than the registered supplier, ask the seller where the stock came from.

Similar relays

All Shelly devices · All in-wall relays and modules

References

  1. EESS Registration Database, equipment E2025019681, status Registered, checked 12 Oct 2026. EESS public search (Advanced Search › Equipment Registrations › Equipment Number).
  2. EESS Registration Database, equipment E2024302623, status Expired, checked 12 Oct 2026. EESS public search (Advanced Search › Equipment Registrations › Equipment Number).
  3. ESPHome devices: Shelly 1PM Gen3
  4. Shelly Knowledge Base: 1PM Gen3
  5. Home Assistant: Shelly integration