Home › In-wall relays and modules › Shelly › 1L

Shelly 1L

Lapsed EESS legacy record · supplier SMART GUYS AUSTRALIA PTY LTD · checked 12 Oct 2026

An in-wall relay module using Wi-Fi, with local control via Shelly HA integration, HTTP / MQTT, ESPHome (after flashing). Neutral wire: not required. Max load: 4.1 A AC (5 A peak); min. 20 W resistive without neutral.

Installation must be done by a licensed electrician.

Specifications

TypeIn-wall relays and modules
ProtocolWi-Fi
Local controlShelly HA integration, HTTP / MQTT, ESPHome (after flashing)
MatterNot listed
Neutral wireNot required
Max load4.1 A AC (5 A peak); min. 20 W resistive without neutral · source
Wall plate sizeNot applicable

Registration in Australia

A registration exists for this model but it has lapsed. Suppliers often re-register under a new number, so before buying ask the seller for the current registration number and check it on the public register.

Records on the register for this model:

Equipment no.StatusExpiryLevelRegistered supplierModels on record
Legacy recordLapsednot shownLegacy databaseSMART GUYS AUSTRALIA PTY LTDSHELLY 1L

This registration is in the older EESS legacy database, which does not show expiry dates or equipment numbers.

If you buy from someone other than the registered supplier, ask the seller where the stock came from.

Similar relays

Shelly Plus 1PMWi-Fi + BluetoothRegisteredShelly 1PM Gen3Wi-Fi + BluetoothRegisteredShelly 1PM Gen4Wi-Fi + Bluetooth + Zigbee + MatterRegisteredShelly 1PM Mini Gen4Wi-Fi + Bluetooth + Zigbee + MatterRegisteredShelly Pro 4PMWi-Fi + Bluetooth + LANRegisteredSONOFF ZBMINI Extreme no-neutral (ZBMINIL2)Zigbee 3.0Registered

All Shelly devices · All in-wall relays and modules

References

  1. EESS legacy database, trade name "Shelly", model "SHELLY 1L", status Expired, supplier SMART GUYS AUSTRALIA PTY LTD, checked 12 Oct 2026. EESS public search (Legacy Search).
  2. ESPHome devices: Shelly 1L
  3. Shelly Knowledge Base: 1L
  4. Home Assistant: Shelly integration